User Manual

127
Prophet X User’s Guide
Global Settings
21. Filter Pedal Mode: Breath CC2, Foot CC4, Exp CC11, LPF Full,
LPF Half—Selects the destination for pedal data received on the rear-
panel filter jack. This allows you to use an expression pedal connected
to this jack for either its default operation of controlling lter cutoff, or
to control the amount of modulation sent to a destination chosen within
the modulation matrix (via the pedal connected to this jack).
• With breath cc2 selected, an expression pedal connected to the filter
jack will control whatever parameter is routed to the modulation source
“Breath” within the modulation matrix.
• With foot cc4 selected, an expression pedal connected to the filter
jack will control whatever parameter is routed to the modulation source
“Foot” within the modulation matrix.
• With exp cc11 selected, an expression pedal connected to the filter
jack will control whatever parameter is routed to the modulation source
“Expression” within the modulation matrix.
• With lpf full selected, an expression pedal connected to the filter jack
will control lter cutoff frequency within its full range of 0-164 (fully
closed to fully open).
• With lpf half selected, an expression pedal connected to the filter jack
will control lter cutoff frequency within half of its range (fully closed
to half open).
22. Seq Pedal Mode: Normal, Trigger, Gate, T-G—Selects the mode for
the rear-panel sequencer jack.
• With normal selected, a footswitch will start sequencer playback.
• With trig selected, an audio signal connected to the sequencer jack
will step the sequencer when the sequencer’s play button is on.
• With gate selected, an audio signal connected to the sequencer
jack will trigger and gate the envelopes while you hold a note or
chord. Additionally, turning on the sequencer or arpeggiator will add
sequencer or arpeggiator playback — but controlled by the Prophet X’s
clock bpm and value settings and not the audio trigger.
• With t-g (trigger+gate) selected, an audio signal connected to the
sequencer jack will trigger and gate the envelopes while you hold a
note or chord. Additionally, pressing the sequencer’s play button will
also add synchronized sequencer playback.