User Manual

119
Prophet X User’s Guide
Calibrating the Prophet X
Programs can also be dumped directly from one Prophet X to another
using the MIDI DIN jack, if the midi sysex cable parameter is set to midi
in the global menu.
To send a program or bank to another Prophet X as a SysEx le over
MIDI:
1. Connect two Prophet X synthesizers together using MIDI cables and
the midi in and midi out jacks on their rear panels.
2. On both synthesizers, press the global button and use soft knob 1 to
select midi sysex cable, then use Soft Knob 3 to choose midi.
3. On the Prophet X that you want to send the programs to, press the
global button again to disable it.
4. On the Prophet X that you want to send the programs from, in the
global menu use soft knob 1 to select dump prog, dump bank, or dump
all banks, depending on which of these you would like to do.
5. Press Soft Key 1 (dump now). The program or bank is exported to the other
Prophet X.
Dumped programs will load back into the same bank and program location in
memory when received by the Prophet X via MIDI.