User Manual

117
Prophet X User’s Guide
Calibrating the Prophet X
Calibrating the Prophet X
Because the Prophet X is calibrated at the factory, controls such as the
Pitch and Mod wheels, Touch Sliders, and analog lters shouldn’t require
re-calibration. However, if you experience unexpected behavior with
these controls, you can use the built-in calibration function to tune them
occasionally.
Calibrating the Filters
To calibrate the lters:
1. Press the global button.
2. Use the Soft Knob 1 to select calibrate filters, then press Soft Key 1
(start cal) .
3. The synthesizer performs its auto-calibration procedure. Don’t turn off
the power while it’s doing this.
4. When nished, the front panel controls will return to normal and you
can play the Prophet X again.
Calibrating the Pitch and Mod Wheels
To calibrate the Pitch and Mod wheels:
1. Press the global button.
2. Use the soft knob 1 to select calibrate wheels, then follow the
instructions in the display.
3. When nished, press the global button again to exit the global menu.
You can now can play the Prophet X again.
Calibrating the Touch Sliders
To calibrate the Touch Sliders:
1. Press the global button.
2. Use the soft knob 1 to select calibrate sliders, then follow the
instructions in the display.
3. When nished, press the global button again to exit the global menu.
You can now can play the Prophet X again.