User Manual

104 Using Sampled Instruments Dave Smith Instruments
Use the lter, envelopes, and effects to shape the sound:
To modify the raw Prophet VS waveshape:
1. Set lter cutoff to 100 and lter resonance to 200.
2. Set lter
env amount to 23 and set the lter envelope to attack 70,
decay 76, sustain 0, and release 72.
3. Set the amp envelope to attack 110, decay 85, sustain 0, and release 71.
4. To add some chorus, press the
effect 1 button.
5. Turn the
effect type knob and select chorus.
6. Set
mix to 64, then set parameter 1 (depth) to 37, parameter 2 (rate) to
100, and parameter 3 (lpf) to 209.
7. Now, to add some lter modulation, in the
lfo section, select lfo 2 and
set its shape to random.
8. With the LFO 2 parameters shown in the main display, press Soft
Button 3 to select the lfo dest menu tab, then select cutoff with Soft
Knob 1.
You can quickly assign the mod destination for LFO 2 by holding down the
LFO 2 selector button and turning the Filter Cutoff knob. This will auto-assign lter
cutoff as the modulation destination for LFO 2.
9. Set LFO 2 frequency to 178 and the LFO amount to -69.
10. Play some chords. Very Prophet VS — minus the joystick.