User Manual

52 Unison Dave Smith Instruments
To use Unison:
1. Press the unison button.
2. Press the
misc params button and use the parameter knob to scroll to
unison mode.
3. Use the
value knob to choose the number of voices to stack.
4. To detune the oscillators while in unison, use the
parameter knob to
scroll to unison detune in the misc params menu.
5. Use the
value knob to choose the amount of detuning.
Using Chord Memory
Unison has another useful feature: chord memory. Instead of assigning
voices to a single note, hold down a chord on the keyboard and press the
unison button. The Prophet Rev2 memorizes the notes of the chord. Single
notes played on the keyboard will then trigger all notes of the stored chord,
transposing them as you play up or down the keyboard. Try using this
feature to create powerful chord stabs.
If you save a program that uses chord memory, the chord is saved with
the program.
To use chord memory:
1. Press the misc params button and use the parameter knob to scroll to
unison mode.
2. Turn the value knob fully clockwise to choose chord.
3. Hold down a chord on the keyboard.
4. Press the unison button. The chord voicing is memorized. Play a few
notes to listen to the result.
5. If you save the program, the unison chord memory is saved with it.
To store a different chord in chord memory:
1. With chord selected as the unison mode in the misc params menu, hold
down a different chord on the keyboard.
2. Press the
unison button. The chord voicing is memorized. Play a few
notes to listen to the result.