User Manual

Prophet Rev2 User’s Guide

Arpeggiator

The Prophet Rev2 has a full-featured arpeggiator. Turn it on, hold a

chord and the synthesizer will play a pattern based on the individual

notes held. Choose a mode (up, down, random, etc.), an octave range (1,

2, or 3), and a tempo, then pair it with an appropriate sound and explore.

While you hold down a chord, pressing any additional notes will add

those notes to the arpeggio. You can change chords and notes and the

arpeggio will continue to play as long as at least one note is always held.

You can also use the

hold feature with the arpeggiator. When you enable

hold, you can release the notes on the keyboard and the arpeggio will

continue to play — with any additional notes that you play added to the

arpeggio.

To prevent the arpeggiator from adding new notes to an arpeggio when keys

are continuously held (and instead start a new arpeggio each time you change notes),

turn arp relatch on in the arpeggiator. To do this, press the arpeggiator’s mode button

and scroll to the arp relatch menu item in the display.

Set the tempo of the arpeggiator with the tap tempo or bpm and divide

controls in the clock section. To use tap tempo, tap this button at least

4 times to set the tempo. You can also sync the arpeggiator to external

MIDI clock, or even an external audio signal. When the arpeggiator is

playing, the sequencer is disabled.

CLOCK ARP

TAP TEMPO ON/OFF

MODEBPM DIVIDE

The Clock and Arpeggiator controls