User Manual

37
Prophet Rev2 User’s Guide
Effects
Clk Sync: On, Off—When a delay effect is chosen, this enables syncing of
the timed delay repeats (feedback) to the arpeggiator, sequencer, or MIDI
clock. When clk sync is on, delay time (parameter 1) provides the
following values:
Value Delay Time
Whole 4 beats
Half dot 3 beats
Half 2 beats
Quarter dot 1 1/2 beats
Quarter 1 beat
Quarter triplet 1 1/3 beats
8th dot 3/4 of 1 beat
8th 1/2 of 1 beat
8th triplet 1/3 of 1 beat
16th dot 3/8 of 1 beat
16th 1/4 of 1 beat
Maximum delay time is 1 second. The combination of longer synced delay
times with slower tempos can result in delay times that would be greater than 1
second. When that happens, the delay time is divided by 2 until it no longer exceeds
the 1 second limit. For example, if the BPM is set to 60 and Delay Time (Parameter 1)
is set to Half, the expected delay time would be 2 seconds. The actual delay time will
be 1 second (i.e. 2 seconds divided by 2).
Parameter 1: Variable, depending on the effect—This knob adjusts
parameter 1 for the chosen effect. Each effect has two adjustable param-
eters, which differ depending on the effect.
Parameter 2:
Variable, depending on the effect—This knob adjusts
parameter 2 for the chosen effect. Each effect has two adjustable param-
eters, which differ depending on the effect.