User Manual

18 Global Settings Dave Smith Instruments
is pressed and then it turns off, which is the opposite of the expected
behavior.) Connect your pedal and choose the appropriate setting based
on its behavior.
22. Sustain Arp: Arp hold, Sustain—Sets the function for the Sustain
pedal input the rear of the synthesizer. Selecting arp hold and pressing
the sustain pedal causes the arpeggiator to hold the current arpeggio as
if you had pressed the hold button on the front panel. Selecting
sustain
chooses normal sustain pedal operation.
23. Calibrate Wheels—Calibrates the Pitch and Mod wheels.
24. Basic Program—Loads a basic, template program.
25. Calibrate—Calibrates the oscillators and lters. You shouldn’t need
to do this under normal circumstances since the lters are calibrated at
the factory and generally don’t require re-calibration or re-tuning.
26. Reset Globals—Sets the global parameters to the factory default
settings.
27. Dump Program—Transmits the current program in SysEx format via
the selected MIDI port. Dumped programs will load back into the same
location in memory when imported back into the synth via MIDI.
28. Dump Bank—Transmits the current bank in SysEx format via the
selected MIDI port. (See item 10, “MIDI Sysex Cable.”) Dumped banks
will load back into the same location in memory when imported back
into the synth via MIDI.
29. Dump All Banks—Transmits all four User Banks in SysEx format
via the selected MIDI port. (See item 10, “MIDI Sysex Cable.”) Dumped
banks will load back into the same location in memory when imported
back into the synth via MIDI.