System information

55
Tempest Operation Manual
Save/Load
Loading a Project replaces all the Sounds and Beats in RAM with the Sounds and
Beats in the Project. Press Save/load again at any time prior to pressing load
now to cancel the operation.
Saving and Loading Sound Kits
Tempest doesn’t actually use sound kit les. Instead, you can choose to load
only the sounds from any beat le into the beat you’re working on, so any beat
becomes the equivalent of a “sound kit” le.
Loading sounds quickly from the Pads screen
Sounds can also be loaded directly from the Pads screen in 16 SoundS mode. The
load Sound parameter enables Sounds for the selected pad to be auditioned and
changed.
Quant: 16th Swing: 50.0% Sound Type Load Sound
120.0 1.1.01 16 Sounds
Tamb
Shaker
Claps
Block
Rim
SftSnr
Snare
Kick
HhOpn
HhTite
TomHi
Crash
TomMid
Ride
TomLo
Splash
Bt: 14/Swing beat 100 bpm Snd: A12/Boomy Kick
In Pads view, strike a pad to select a Sound and then turn the load Sound soft
knob clockwise to load the rst available Sound for the current Sound direc-
tory. Continue scrolling through the list to audition different Sounds or use the
Sound diReCtoRy soft knob to change to a different directory of Sounds. Press the
ReveRt soft key to revert to the saved Sound.
Note: ReveRt is available until another pad is struck in 16 SoundS mode.
Pads can be struck in any other Pad Function mode, but once another Sound
pad is struck, ReveRt is unavailable. To return to the saved settings, reload
the le. ReveRt Sound always resets the sound to the last loaded or saved
setting of it’s Beat.