User manual
Soundtower Mopho PlugSE V1.1 4
Record/Playback Automation Data
Test the writing and reading automation data as you would any other VI in your software. Enable the track
to ‘Write’, start playback and tweak some controls on the PlugSE™ Editor or twist some data controls on the
Mopho. Rewind, put the automation track into ‘Read’ and start playback and conrm that automation data is
communicating with the Mopho.
Mopho PlugSE™ Operation
The Mopho PlugSE™ allows to you ‘reach inside’ the Mopho with total control of all the functions built into the
instrument – not only the front panel controls, but also the ‘hidden’ functions found in the Mopho menus.
Parameter Panel
The Mopho PlugSE™ Editor displays a faithful reproduction of the Mopho’s front panel. Every knob, switch,
and rotary control is exactly as you would nd it on the Mopho, and all Editor controls are interactive and func-
tional. Changes made anywhere on this panel will cause corresponding changes to be made on the Mopho
hardware, and also sent to the DAW (host) automation while recording.
At the top of the Parameter Panel window are a series of buttons that select functions or display drop down
menus. From left to right: BANK, FILE, EDIT, MIDI, HOST, Send, Receive, WRITE, and PIANO. A description
of each button appears below.
BANKS
Click on the BANK button and the Parameter Panel splits into two sections: a reduced panel view on the right-
hand side, and a new view containing a scrollable list of program banks on the left-hand side. There are three
banks with 128 programs in each bank (arranged just like the three banks in the Mopho), and each bank entry
contains both a program name and its corresponding sound category.