User manual

Soundtower Mopho PlugSE V1.1 10

Let’s take a look at the three sections of the top Sequencer.

This area shows the Mopho parameter that will be affected by the sequenced

steps, selected in the drop down list accessed by clicking the down arrow. The

Edit button will be explained later.

The middle section shows the 16 steps and the values of each step. While all the values may be entered in this

window, there is a more convenient way to do this and will be shown below in SEQUENCEREDITING section.

This area to the right is the master section for all four se-

quencers. Click on the red LED to turn the sequencer on

and off, adjust Tempo, select SequencerTrigger source and

choose the ClockDivide option to determine the gate time

of each step relative to the tempo.

Additionally, by clicking on the DrawMode button, you

have the options for Sliders, Pen or Quantize. Choosing

Sliders allows the individual steps of the sequencer to be

raised and lowered to specic values. Selecting Pen allows

you to click and drag over the area of the screen indicating

the sequencer steps and the steps will jump to the level the

cursor was at as it passed over. Quantize is a secondary Slider mode that moves the steps in values of 2.

Clicking PROGRAM in the upper right corner will bring you back to the main editor page.

Clicking the Edit button in the in the left area of any of the four sequencers will open the window shown

below.