Specifications

14
Glide Mode: FixRate, FixRate A, FixTime, FixTime A—Determines how the
oscillators respond when G
LIDE is on.
FixRate: The time to transition between notes varies with the interval between
the notes; the greater the interval, the longer the transition time. The glide rate is
fixed.
FixRate A: The same as FixRate, but glide is only applied when playing legato.
That is, glide only occurs when a note is held until the next note is played. This
effectively allows glide to be turned on and off from the keyboard.
FixTime: Glide is set to a fixed time, regardless of the interval between notes.
FixTime A: The same as FixTime, but glide only occurs when playing legato.
Pitch Wheel Range: 0...12—Sets the bend range, in semitones, of the pitch
wheel. The setting is the range in the positive or negative direction. For
example, a setting of 7 lets you bend a note up or down by a fifth.
Key Assign: Low Note, LowRetrig, HighNote, HighRetrig, LastNote,
LastRetrig
—Key Assign (aka note priority) determines what note gets priority
when more than one note is played on the keyboard or via MIDI. Low-note
priority is most common in vintage synths and is often used for playing trills by
holding a note and repeatedly tapping a lower note. LowRetrig causes the
envelopes to be retriggered with each keystroke. HighNote and HighRetrig are
similar to the low note settings, except that the highest note is given priority.
And LastNote and LastRetrig give priority to the last note played.