User guide

DSI Mopho SoundEditor - Updating the OS

Appendix E

Updating the Mopho OS

Updating the OS

The  rst step in updating the Mopho OS is to get the update  le. Go to:

www.davesmithinstruments.com/support

and download the OS update. This  le will typically be a single ‘.syx’  le. Place the  le

on your desktop or in an easy-to- nd location on your computer, then follow these steps:

1. Begin by con rming that MIDI connections are established and the correct MIDI

Ports are selected between SoundEditor and the Mopho hardware. If you have

used SoundEditor previously, these connections should already be established.

2. If you haven’t already done so, launch SoundEditor. After SoundEditor boots up,

select ‘Mopho OS Update’ from the Mopho menu:

IMPORTANT: Refer to the documentation supplied with your OS update for

complete details on the update procedure BEFORE updating the  rmware with

SoundEditor.

This section will describe the process of updating the Mopho Operating System using

SoundEditor. It is important that you heed all warnings and follow the procedure

carefully to insure a successful update.