User guide

41
DSI Mopho SoundEditor - Bank Manager/Librarian
42
DSI Mopho SoundEditor - Bank Manager/Librarian
8.7
Moving Programs between Categories
Mopho Programs can be moved between Categories using several transfer methods. The
 rst method is to set the red Transfer Arrow (click in the Transfer Arrow column to set
the arrow to point to the desired Category), select the desired Program and then click on
the Arrow. The Program will transfer from the current Category to the new Category. In
the screen shot below, the Program ‘Triangular’ is being transferred from the ‘Res Lead’
Category into the ‘Soft Lead’ Category:
The second method involves simply dragging the desired Program from the current
Library Category into another Category. In the screen shot below, the Program ‘Feedback
Sync’ is being dragged into the Library’s ‘Res Lead’ Category. As mentioned previously,
when Programs are moved by dragging, only an outline box of the Program is displayed
as it is being moved.
Either method can be used to move single Programs or groups of Programs.