User guide
39
DSI Mopho SoundEditor - Bank Manager/Librarian
40
DSI Mopho SoundEditor - Bank Manager/Librarian
8.5
Librarian Toolbar
The Librarian Toolbar (below) provides convenient access to frequently-used Librarian
commands and functions. Descriptions of each Toolbar button follows.
The
Add Current Program
button adds the current Program from the User Bank to the
active sound category. Note that new entries are always added to the end of the list, so if
you have a lot of Programs in a particular category, you may have to scroll down to see
the new entry.
The
New
button allows you to create a new Library. After selecting
New
, you will get a
message dialog box asking if you wish to save the existing library. To save the existing
Library, clicking the
OK
button in the message box will present you with a ‘Save As...’
OK button in the message box will present you with a ‘Save As...’ OK
window where you can name and save the current Library le to the speci ed storage
location. After the ‘save’ operation is complete, you will have an empty (new) Library.
If you decline to save the existing Library, the contents of the existing library (all 32
categories) will be cleared, leaving an empty Library.
The
Save
button allows you to save the current Library. Selecting
Save
produces a ‘Save
As...’ window where you can name the Library File and select the storage location for the
le.
The
Load
button allows you to load a library le into the Librarian. Loading a library
le is just like loading a bank le, but with a difference – library le names have the
extension .m_l.
The
Add Current Program, New, Save
and
Load
buttons duplicate commands found in
the menus.
Finally, although not part of the operational controls described above, the
Edit
button
takes you to the Controls Window, where you can edit the Library’s currently selected
Program.
You can load a new library into an existing library to combine the presets of each.
You can also combine presets from different banks using the ‘Load from User
Bank Data’ command.