User guide

DSI Mopho SoundEditor - Sequencer Window

Appearing on the far right of the panel

are additional controls to modify the

selected sequence. These include an

executable Functions list, UNDO and

DONE buttons, and a Control Adjust

arrow tool.

The Functions list provides commands to copy, paste and modify the selected sequence.

Commands include:

Copy:

Copies the selected sequence.

Paste:

Pastes to any selected sequence.

Reverse:

Reverses the sequence order within the speci ed step range.

Invert:

Inverts all values within the speci ed step range. Zero values become

Resets and vice versa.

Randomize:

Randomizes all values within the speci ed step range. Repeated

selecting of the Randomize function creates a new series of random sequence

values.

Randomize Q:

Works like Randomize, but automatically adjusts step values

up or down to real note values.

Step Up:

Creates a sequence of incremental positive values based on the  rst

value in the range. For example, if the  rst step value is 0, Step Up will create

a series of values where the second step value will be 1, the third 2, etc. If the

 rst step value is 45, then the second will be 46, the third 47, etc.

Step Q:

Works like Step Up, but increases the step values by 2. If the  rst step

value is 10, Step Q will create a series of values where the second step value

will be 12, the third 14, etc.

The

Control Adjust

arrows raise or lower the selected sequence value by ‘1’ for each

click of the control. Holding the control button instead of clicking provides for rapid

adjustment of the sequence values.

The

UNDO

button offers multiple levels of undo. You can undo any chord or function

selection back to the point at which you started.

The

DONE

button closes the Function panel..