User guide

DSI Mopho SoundEditor - Sequencer Window

7.4

The Functions Button

Just below the

Reset

button is the

Functions

button. Selecting the

Functions

button opens

a Function panel (this will be a drawer on a

Macintosh or a window on a PC) that allows you

to access additional sequencer functions. These

include adjusting the length of each sequence,

options to create pitched sequences from pre-

loaded sequence data, and options to alter the

sequence data.

The Functions button is only available in the Pro version.

In the Sequencer Function panel, the

Seq

buttons that appear on the far left (

Seq1

thru

Seq4

) are used to select the speci c sequence that will be affected by the panel functions.

The ‘From Step’ and ‘To Step’ sliders allow you to specify the range of steps that will be

affected within the selected sequence:

In the  gure above, for example, Sequence 4 has been selected with a step range of

5 - 10. This means that any function chosen from either the Chords or Functions lists

will only affect steps 5 thru 10 in Sequence 4, and no others. Also, note that the color of

the selected step bars is different from the others - this provides a visual indication of the

sequence steps that will be affected by the chosen functions.