User manual

Soundtower Evolver PlugSE V1.0 8
GLOBAL
Clicking on GLOBAL button opens GLOBAL
SETTINGS Panel where you can adjust the
Evolver global settings including volume,
transposition, tuning, clock, MIDI parameters
and input gain.
Host
Host function allows you to send programs to the VST patch list. Select a Program you wish to save. Click
HOST. You will be presented with a dialog indicating the current host VST program selected. While this dialog
is open, click on the VST patch list and select the slot you wish to save the Evolver program to. Click OK. Go
back to the VST patch list and click on the same slot and the patch will appear.
Send
The Send button presents two options:
• CurrentPreset - sends the preset that is loaded on the
editor panel.
• FXBankPreset - sends the unmodied current VST patch
to the Evolver, allowing you to reset the patch if you return
to the beginning of the song and need to undo any changes
that automation may have made to the sound.
Receive
The Recv (Receive) button gets the currently selected Program
from the Evolver.
WRITE
The WRITE button opens a dialog box that allows you to send
the current Program to the Evolver and to be written into memory.
You can also use this window to change the name before saving
by right clicking on the name. Additionally, you may save the
current Program to a different location. The Program that is
active when the WRITE button is pressed appears at the top of
the window. You may then select a different Bank and Program
location using the Bank buttons.