Data Sheet

TECHNICAL DATA
Rating: Current 0.5A Ambient Temperature Range: Plug -25
o
C to +60
o
C
Voltage AC 125V
Hirose offers tooling to suite all production
volumes. Hand tooling conveniently allows
termination on site or in the factory
environment, whilst the T12 press &
applicator only requires mains electricity
and lends itself to high volume production
in the factory. Both tools terminate the plugs in one
operation and come with all the parts needed to allow
conversion to terminate Hirose TM11 (Cat 5E) plugs.
TM21 Series - RJ45 Shielded Plugs
For the latest information and availability please contact your local sales office.
Hirose Electric UK Ltd
Crownhill Business Centre, 22 Vincent Avenue, Crownhill, Milton Keynes, MK8 0AB, UK
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • Web: www.hirose.co.uk
A World Leader in Connector Technology
Item Standard Condition
Insulation Resistance
100MΩ or more Measure with DC 100V
Withstand Voltage
Without flashing, insulation perforation AC 500V for 1 min
Contact Resistance
230mΩ or less Measure with 100mA
Vibration Resistance
Without electric breaks of 5µ sec or longer;
contact resistance of 250mΩ or less
10 - 55Hz, half amplitude 0.75mm, 2 hours
in 3 directions
Mechanical Shock Resistance
Without electric breaks of 5µ sec or longer;
contact resistance of 250mΩ or less
Acceleration 490m/s
2
, duration 11ms, 3
times in 3 directions
Near-End Crosstalk
30.1dB or greater (when measured at the
channel link)
Measure properties between each pair with
250MHz
Sampling Lifetime
Contact resistance of 250mΩ or less 200 times
Temperature Cycle
Contact resistance of 250mΩ or less;
insulation resistance of 100MΩ or greater
(-55
o
C: 30 min
→
5 to 35
o
C: 5 min
→
85
o
C:
30min
→
5 to 35
o
C: 5 min) 5 cycles
Humidity Resistance
Contact resistance of 250mΩ or less;
insulation resistance of 1MΩ or greater (in
humid conditions); insulation resistance
100MΩ or greater (dry conditions)
Kept for 500 hrs in 40
o
C, 90 to 95%
humidity conditions
Salt & Water Spray
Contact resistance of 250mΩ or less
Kept for 48 hrs in a 5% concentration salt
water solution
CAT6
Performance
CABLE SPECIFICATIONS
B0.5mm solid wire
AWG 24 twisted wire (B0.2mm x 7)
AWG 25 twisted wire (B0.18mm x 7)
Insulator Outer Dia.
B0.9 - 1.0mm)
Drain Wire AWG 26 (tinned wire)
Seath Outer Dia.
B6.6mm)
Conductor
APPLICABLE TOOLING
Handtool
Applicator
T12 Press