User's Manual
Chapter 11
Management S
e
tt
i
n
g
s
The
Management
section lets you configure administration, management VLAN, SNMP
settings, backup/restore settings, firmware upgrade, time settings, and log settings. This
chapter describes these settings.
11.1
A
d
m
i
n
i
s
t
r
a
t
i
o
n
Click the
Administration
link under the
Management
menu to change the user name and
password used to log on to the OM2P-LC/OM2P-HS Web Configurator . The default user
name is
ad
m
i
n
and
the default password is admin. Changing these settings protects the
OM2P-LC/OM2P-HS configuration settings from being accessed by unauthorized users.
Name Enter a new username for logging in to the Web Configurator.
Password Enter a new password for logging in to the Web Configurator
Confirm Password Re-enter the new password for confirmation.
Remote
Management
Enable or disable remote management.
Remote Upgrade Specify whether the OM2P-LC/OM2P-HS firmware can be upgraded
remotely.
Remote
M
a
n
ag
e
m
e
n
t
P
o
rt
If remote management is enabled, enter the port number to be
used for remote management. For example: If you specify the
port number 8080, enter
http://<IP address>:8080
to access