User's Manual
8.2 Wireless Security
S
e
tt
i
n
g
s
The Wireless Security Settings section lets you configure the EOH200’s security modes: WEP,
WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly
recommend you use WPA2-PSK.
8.2.1
W
E
P
Security Mode Select WEP from the drop-down list to begin the configuration.
Auth Type Select Open System or
S
h
a
r
e
d
.
Input Type Select an input type of Hex or
A
S
C
II
.
Key Length Level of WEP encryption applied to all WEP keys. Choices are
Select a 64/128/152-bit password lengths.
Default Key Specify which of the four WEP keys the OM2P-LC/OM2P-HS uses
as its default.
Key1 Specify a password for security key index No.1. For security, each
typed character is masked by a dot
(
●
).
Key2 Specify a password for security key index No.2. For security, each
typed character is masked by a dot
(
●
).
Key3 Specify a password for security key index No.3. For security, each
typed character is masked by a dot
(
●
).
Key4 Specify a password for security key index No.4. For security, each
typed character is masked by a dot
(
●
).