Manualshelf

User's Manual

ManualsBrandsDatto ManualsElectronicsWireless 802.11b/g/n Mesh Router
31323334353637383940
discovered Access Point to establish a connection.
Prefer BSSID Enter the MAC address if known. If you select an Access Point in
the Site Survey, this field is completed automatically.
WDS Client Click the appropriate radio button to enable or disable WDS
Client.
Wireless Security See section 8.2 for information.
Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and
return previous settings.
Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).
Profile If you used the Site Survey, the Web Configurator shows nearby
Access Points. To connect to an Access Point, click the Access
Point’s BSSID.
Wireless Security See the Wireless Security section.
Refresh Click Refresh to scan again.
If the Access Point has been configured to suppress its SSID, the SSID section will be blank
and must be completed manually.