User's Manual



5.IntheLocalAreaConnectionPropertiesdialogbox,verifythatInternetProtocol ( T C P / I P)
ischecked.ThenselectInternetProtocol(TCP/IP) andclickthePropertiesbutton.The
InternetProtocol(TCP/IP)Propertiesdialogboxappears.

6.IntheInternetProtocol(TCP/IP)Propertiesdialogbox,clickObtainanIP add ress
automatically toconfigureyourcomputerforDHCP.ClicktheOKbuttontosavethis
changeandclosetheInternetProtocol(TCP/IP)Propertiesdialogbox.

7. ClicktheOKbuttonagaintosaveyourchanges.

8. Restartyourcomputer.


4.4ConfiguringMicrosoftWindows 2000


UsethefollowingproceduretoconfigureyourcomputerifyourcomputerhasMicrosoftWindows
2000installed.

1. OntheWindowstaskbar,clickStart,pointtoSettings,andthenclickControl Pan e l .

2.IntheControlPanelwindow,double‐clicktheNetworkandDial‐upConnectionsicon.If
theEthernetadapterinyourcomputerisinstalledcorrectly,theLocalAreaConnection
iconappears.

3. Double‐clicktheLocalAreaConnectioniconfortheEthernetadapterconnectedtothe
OM2P‐LC/OM2P‐HS.TheLocalAreaConnectionStatusdialogboxappears.