User Manual

3: Operation
3-14 RT7000-MSOP
(7) OTHR ADRS For selecting an address number to review, change or
add for a station where messages are sent (from 00 to
99). To enter a new address, enter the number. To
change an existing address number, scroll to the num-
ber and enter a new one.
(8) OTHR NAME For entering a new or different name for the other
address selected in (7) OTHR ADRS. Any existing
other address is briefly displayed. Use the alpha charac-
ters on the keypad to enter from 3 to 15 characters (no
spaces or punctuation). To delete a name enter three
periods (...).
(9) MOD GRP For modifying or defining the channels to include in a
scan group for scanning. Scroll to the channel to set. To
include a channel in a scan group, enter 1 (ON). To
remove a channel from a group enter 2 (OFF).
(10) SND SELCT For enabling or disabling sounding. Enter 1 for sound
OFF and 2 for sound ON.
(11) SND ADRS For setting the sounding feature to the self address
selected in (5) SELF ADRS.
(12) SND LEN For setting the length of each sounding transmission.
The recommended sounding length is 5 or 10 seconds.
(13) SND INT For setting the time intervals for sounding. Enter from
1 minute to 24 hours (0001 to 1439 minutes).
(14) CALL LIM For limiting the number of attempts made on each
channel when trying to establish an ALE link (00 to
99).
(15) SLF TMOUT For setting the length of time this (self) transceiver
remains linked after the transmission of all outgoing
messages (000 to 600 in 15-second intervals).
(16) OTR TMOUT For setting the length of time the other radio remains
linked when there are no incoming responses (000 to
600 in 15-second intervals).
(17) AUTO FILL For indicating if you want the radio to automatically
add the address of any station ALE hears to the list of
approved other addresses. Enter 1 for OFF and 2 for
ON, or use the arrows to toggle between OFF and ON.