User Manual

3: Operation
3-6 RT7000-MSOP
Using Menus to Change Settings
The RT7000 provides menus for adjusting settings. The Alpha menu is for
changing settings specific to the 7000TC option (Transcall, Selcall, and
TransAdapt). The Alpha menu also allows you to access the ALE submenu
which provides its own set of functions for changing settings specific to the
ALE option.
To access the Alpha menu:
1. Press the ALPHA button to display the first function on the menu.
2. Press the desired function number and then E, or press the arrow buttons
to scroll through the menu to the function and press E.
3. Once you select and enter a function, use the arrow buttons to scroll
through further selections within that function. Press E to enter or access
a selection.
For example, press ALPHA, 17, and E to access the ALE submenu.
Alpha Menu
Table 3-1. Alpha Menu
Alpha
Function
Description
1 OPTION (not used)
2 SCAN SET CHANNEL (for non ALE)
3 SCAN RATE (for non ALE)
4 PRIORITY CHANNEL
5 RF POWER (TX)
6 FREQ BLANK (blanks LCD frequency, disables mode
changes)
7 LOCKOUT (disables frequency and mode changes)
8 RECEIVE SET Rx ONLY (disables TX operation)
9 SET CLOCK (if option installed)
10 ALARM TIMER ON/OFF
11 SET ALARM
12 Time and date display
13 TA/TC/SC Rx ADDR (TransAdapt/Transcall/Selcall receive
address)
14 TRANSADAPT BER NUM (TA bit error rate)
15 SCAN GROUP NUMBER (for non ALE)