User's Manual

P25 Unit ID Call Picklist
If a call is received with a matching UnitID in the lookup table, the name is displayed. Otherwise,
the actual UnitID is displayed. It can be programmed by the PC Programmer or by accessing the
radio’s main menu. This picklist cannot be cloned.
To access an existing P25 UnitID picklist:
1. Turn the channel knob to the desired P25 digital channel.
2. Press and hold the # key to display the list. Do one of the following.
• To make a UnitID call to someone who is not programmed into the radio, scroll to the first
selection,
ENTER # . Press <ENT> and enter the ID. Press <ENT> and PTT.
• To make a UnitID to someone in the existing list, scroll to one of the UnitID’s
programmed into the radio. Press <
ENT >. The name or UnitID number replaces the
channel name while in this mode. Press PTT.
3. To return to normal operation, press <ESC> .
To edit the P25 UnitID picklist via the keypad:
1. Press < ENT > to access the Main Menu.
2. Scroll to PROGRM and press < ENT >.
3. Scroll to LISTS and press < ENT >.
4. Select IDCL and press < ENT >. Do one of the following:
• To add a new ID, select ADD NEW. Enter the Unit ID number (1 to 999) and press < ENT >.
Enter the unit ID name and press <
ENT > to add it to the list.
• To delete an existing ID#, select DELETE. Scroll to the name to delete and press < ENT >.
Verify the deletion: Select
YES and it’s deleted. Select NO and the list is displayed again.
5. Press <ESC> to exit the P25 UnitID mode.