User's Manual

MODE
Analog Analog settings displayed.
B/W
12.5 KHz or
25 KHz (default)
Bandwidth.
RX
136 MHz to
174 MHz
Receive frequency.
NONE No receive squelch.
NOISE (default)
SQ=
If you choose noise, adjust the
squelch level by highlighting
SQ
and scrolling left and right.
DCS
CODE=
If you choose DCS, highlight
CODE and enter the DCS code.
RXSQMD
CTCSS
TON
If you choose CTCSS, highlight
TON and enter a CTCSS tone.
TX
136 MHz to
174 MHz
Transmit frequency.
None No transmit squelch.
CTCSS
TON
If you choose CTCSS, highlight
TON and enter a CTCSS tone.
TXSQMD
DCS
CODE=
If you choose DCS, highlight
CODE and enter the DCS code.
LO PWR
0.5, 0.1, 1.0,
2.0 (default), 5.0
Low transmit power setting.
HI PWR
0.5, 0.1, 1.0, 2.0,
5.0 (default)
High transmit power setting.