User's Manual

BAUD
4800, 9600, 19200, 38400 BAUD Rate
CNTRLS
Enable/Disables Turn radio controls on or off.
2.
Channel Submenu
This submenu allows you to add new channels or make changes to existing channel settings.
Channels can be selectively locked, preventing you from making changes. If you select a locked
channel,
CHANNEL LOCKED/ACCESS DENIED is displayed.
Adding a New Channel
The following is an example of programming a new channel into an empty slot. This same
process is used to modify existing channels.
Note: The new channel is assigned to whatever channel position the radio was selected to at the
time of initial programming.
1. From the main Menu go to ROPTNS, PROGRM, CHANNEL and press enter. You may be
required to enter a valid password to proceed.
2.
Press < ENT > .
4. Press < ENT > again to access the tag setting for entering a name for this channel. Use cell
phone techniques to enter the name. For example, to enter N, press the 6 key twice. To enter
E, press the 3 key twice. To enter W, press the 9 key once. Press
< ENT > to finish.
5. Scroll down to the MODE setting, press < ENT > and change the mode to ANALOG .