User's Manual

a  around a channel type
means it is included in a scan list
Modulation type icons:
AW = analog wideband
AN = analog narrowband
DG = digital
a
 around the modulation type means some form of selective squelch is active for the channel
(NAS, CTCSS or DCS)
Other icons:
TX = transmit channel in scan mode
RX = receive channel in scan mode
TA = talkaround
∩∩∩ = repeater


 = encrypted
U = unit ID call mode
= Battery Gauge
= Signal Strength Indicator
Navigation Buttons
These four buttons perform actions determined by what appears on the display.
The
MENU button lets you access the internal software menus, toggle between a setting and its
value and save data. The
ESCAPE ( <ESC> ) button allows you to return to a previous display
without making changes to values. The Scroll up and down buttons highlight menu choices for
selection.
The left and right scroll buttons highlight alpha and numeric characters when changing values.
Keypad
Because all channel information and switch definitions can be programmed by the PC
Programmer, the keypad is not required for basic operation of the radio. The keypad is used to
select options within the radio, or to reprogram almost any setting. It is used for DTMF signaling,
keypad programming and feature selection, among other things.
Collar Switch (three position)
The 3-position (A, B, C) collar switch located under the ON/OFF Volume control is programmed
using the PC Programmer. Ask your radio programmer how it is setup to function.