Specifications

4 User Maintenance
1006-0939-000 4-9
4-9
Flow sensor maintenance
Before you use the system, complete the preoperative test procedure. Refer to
"Appendix - Preoperative Tests" section of Part 1 of the Operation Manual.
Step 1
Remove the flow sensor
module (Cleaning and
Sterilization section).
Push in the tab and remove
the cover.
Step 2
Install the new sensor with
the arrows up.
Keep the tubes straight.
Step 3
Slide on the cover. Do not
pinch the tubes.
AA.96p.037
AA.96p.039AA.96p.038