User manual

UK
DATEQ SPL-D3 Manual Introduction
5
Introduction
The SPL-D3 is an advanced audio level display that stores the sound level samples for at least
twelve months. The sound level samples can be viewed using the configuration software or
externally stored through on a USB FAT32 drive. Other important data is also stored like powering
up, sanctions or possible tampering.
Using the configuration software the SPL-D3 can be read out and adjusted.
On release Windows 7 platforms and later are supported. All users can only view settings and
logging. To adjust configuration settings an additional password and license file is required. To
connect to the SPL-D3 a windows computer with USB support is required.
The SPL-D3 uses a measurement microphone to determine the actual sound level. When
measurement shows the sound levels are about to exceed, the display will change from green to
orange and red when levels are actually exceeded.
The special calender functions allow for different sound levels during the day and year.
With the special SRL-1 circuit breaker an external warning light can be connected along the the
main power supply for example the DJ booth monitor. This way the maximum sound level is
always insured without touching the sound quality.
Productondersteuning
Voor vragen over de SPL limiter serie, accessoires en andere producten kunt u contact opnemen
met:
DATEQ Audio Technologies
De Paal 37
1351 JG Almere
Nederland
Telefoon: 036 – 5472222
E-mail: [e-mail]
Internet: www.dateq.nl