User manual

18
Installation DATEQ SPL-D3 manual
UK
Configuration license
The configuration software are commonly only used to view settings and read sound sample
logging. For viewing or exporting no license or password is required. Changing settings, including
first installation an installer license and password is requirer.
The installer license is only granted to certified professional audio installers. When you own an
SPL limiter and settings need to be changed, you need to contact your local distributor or installer.
The closest supplier can be found at the Dateq selling points part of the website: www.dateq.nl.
An installer license is linked and registered to the installing company and can not be transferred to
third parties. The installer license contains all company and contact details, that will be stored into
the SPL limiter during configuration.
Unlocking the limiter
Before changes can be made the license password must be entered.
This password is linked and stored within the license file
SPLD3.DSR.
The license file SPLD3.DSR must be copied into the folder that contains the software.
If no valid license is detected the software will display this.
Please note; a valid license file must be installed before starting the software.