User manual

EN DATEQ BCS50 user manual BCS52 settings 17

BCS52N settings

Jumper name Possibilities Description

CUE (1) CONT. (D) After the module has started or stopped the start or stop outputs

remains active. (J1 controls line 1 and J2 controls line 2)

PULS The start and stop output generate a pulse (500mSec) when the

module is started or stopped. (J1 controls line 1 and J2 controls line

START (2) FADER (D) The channel is activated when the fader is opened.

SWITCH The channel is activated when the ON-key is pressed. When the fader

is opened and the ON-lamp does not light up no audio will be fed

through.

(D) indicates the default setting