Technical data

Chapter 4 System configuration 45
Installation Checklist and Quick Start Guide
To configure the system using Element Manager
1 Open Element Manager.
2 From the Network menu, select New Network Element, and then select Business
Communications Manager.
3 Enter the BCM50 system IP address in the dialog box (default is 10.10.10.1).
4 Click Ok.
5 Select the BCM50 system IP address from the Network Elements folder.
6 Enter the following username and password:
Username: nnadmin
Password: PlsChgMe!
7 Click Connect.
Element Manager connects to the BCM50 system.
8 Configure the required parameters. See the table BCM50 system parameters on page 43.
For more information about configuring the system, see the online Help within Element Manager.
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement logo
Configuration > Resources
> Telephony Resources
IP Telephones N/A
SNMP Agent:
• Enable/disable SNMP
agent
• Minimum security
• SNMP version support
Configuration >
Administrator Access >
SNMP > General tab
SNMP Agent N/A
SNMP community:
• Community string
• Type of access
Configuration >
Administrator Access >
SNMP > Community
Strings tab
SNMP Community N/A
SNMP manager:
• Manager IP address
Configuration >
Administrator Access >
SNMP > General tab
SNMP Manager N/A
User account:
•User ID
•Group
• Description
• Callback number
Configuration >
Administrator Access >
Accounts and Privileges >
View by Accounts tab
User Account N/A
Table 15 BCM50 system parameters (Sheet 3 of 3)
Parameters Element Manager Startup Profile Telset Administration
15 minutes