Technical data

Chapter 4 System configuration 43

Installation Checklist and Quick Start Guide

3 On the Administrator Applications page, click Startup Profile template.

The Startup Profile template panel appears.

4 Read the information on this panel.

5 Click Download Startup Profile template on the right side of the screen, and follow the

instructions to download.

Software keycode

You require a keycode to enable software features on your BCM50 system. You receive only one

keycode whether you purchase one feature or a bundle of features. You can load a keycode using

Element Manager, Startup Profile, or Telset Administration.

To generate a keycode, you require an authorization code for each feature you purchase.

For example, if you require one feature, you receive one authorization code and you generate one

keycode. If you purchase four features, you receive four authorization codes, but you generate

only one keycode.

To generate a keycode through the Nortel Keycode Retrieval System (KRS), you require:

• Username and password for the KRS (http://www.nortel.com/support/tools/krs/index.html)

• BCM50 authorization code for each feature

• BCM50 system ID

For more information about keycodes, see the Keycode Installation Guide.

System parameters

This section provides information about configuring the basic BCM50 system parameters (see the

table BCM50 system parameters on page 43). You can configure the basic parameters using the

Startup Profile template or Element Manager. After configuring the basic parameters, you can use

Element Manager to configure more advanced parameters.

For more information, see the chapter “Configuring the BCM50 system” in the Installation and

Maintenance Guide.

Table 15 BCM50 system parameters (Sheet 1 of 3)

Parameters Element Manager Startup Profile Telset Administration

Keycode Configuration > System >

Keycodes

Keycode Feature 9*8 > Feature codes

IP address:

• Obtain dynamically

• IP address

• IP subnet mask

• Default gateway

Configuration > System >

IP Subsystem

IP Address Feature 9*8 > IP Address