Technical data

Chapter 1 Getting started 11
Installation Checklist and Quick Start Guide
Default values
Use the table Default IP addresses on page 11 and the table Default user names and passwords on
page 11 to view and record changes to the default BCM50 system information.
10
min
Apply the keycode. Software keycode on page 43
15
min
Configure the required BCM50
system parameters (Element
Manager or Startup Profile).
System parameters on page
43
1 min Configure the MBMs with Element
Manager.
MBM configuration on page
48
N/A (Optional) Complete the
configuration by customizing other
parameters.
Additional parameters on
page 49
Note: The stated times vary depending on the number and type of items installed.
Table 2 Default IP addresses
Port IP address (subnet mask) New IP address
OAM port (see Note) 10.10.11.1
(255.255.255.252)
BCM50 or BCM50b LAN (no router) 192.168.1.2
(255.255.255.0)
Router LAN
(BCM50a, BCM50e, BCM50ba, or
BCM50be)
192.168.1.1
(255.255.255.0)
Note: DHCP is enabled on the OAM port and assigns the following IP address: 10.10.11.2
Table 3 Default user names and passwords
Tool User ID | User name Password New password
Element Manager nnadmin PlsChgMe!
BCM50 Web page
(http:// [IP address])
nnadmin PlsChgMe!
Telset Administration
(F9*8 and F**Config)
SETNNA
(738662)
CONFIG
(266344)
Telset Administration voice mail
(Feature 983)
SETNNA
(738662)
CONFIG
(266344)
Telset Administration initialize
voice mail
(Feature 983)
–CONFIG
(266344)
Router – setup
Table 1 Installation and configuration checklist (Sheet 2 of 2)
;
Task Reference Comments