Operation Manual

EN
Operation Dateq Ace Manual
9
Output zones
The Ace has two identical output zones. Zone 1 has a triple equaliser, balance and volume control.
Zone 2 has a volume-control. By means of the ‘EQ2’ switch on the connectorboard the equaliser
can be linked to both outputs simultaneously.
-12
+6
+3
0
-6
z
GAIN
MID
0
-1
2
3
4
55
4
3
2
1+
HIGH
0
-1
2
3
4
55
4
3
2
1+
LOW
0
-1
2
3
4
55
4
3
2
1+
POWER
R
L
0+3-3-9
-15
6
Signal
Zone 1 Zone 2
TalkOver
-12
-20
+6
+3
0
-6
z
GAIN
-30
-12
-20
+6
+3
0
-6
z
GAIN
-30
LOW Low tone control.
MID Mid tone control
HIGH High tone control.
GAIN Volume control for the unbalanced stereo output (zone 1 and zone 2) and the
balanced stereo output (zone 1 only).
TalkOver Enables or disabled the TalkOver function. The LED lights up green when the
TalkOver function is enabled, but not active. When you speak in one of the
microphones and the TalkOver circuit of that microphone is enabled all the other
channels will be attenuated. The LED will light up RED to indicate TalkOver
activity.
VU-METER The Ace has a 2 x 5 segments LED-VU-meter. The signal of zone 1 is visible on
the meter. An operating level of approximately 0dB is nominal.
POWER Mains switch.