Operation Manual

EN
Operation Dateq Ace Manual
5
Connectorboard
At the rear all the audio in and outputs can be found, just as the euro-mains connector (with built in
mains-fuse) and, when installed, the optional zone output with the volume control input.
123456
MicMicMicMic LineLineLineLineLine 1Line 1 Line 2Line 2
gaingaingaingain
micmicmicmic
+++ +
Zone 1
RL
Zone 2
Tape Control
LLLZ1
LL
RRRZ2
RR
Mains 230V/ 50Hz/ 30VA
Fuse: 315mA/ slow
0dB 0dB 0dB 0dB 0dB 0dB-52dB...-30dB -52dB...-30dB -52dB...-30dB -52dB...-30dB0dB 0dB0dB+6dB +6dB
M
O
N
O
E
Q
2
Zone 1/ Zone 2 outputs (Cinch female)
Pin Function Type
Tip Audio + Out
Shield Ground A-GND
L/ R balanced Zone 1 Outputs (XLR 3-pins male)
Pin Function Type
1 Ground A-GND
2 Audio + Out
3 Audio - Out
Tape stereo output (Cinch female)
Pin Function Type
Tip Audio + Out
Shield Ground A-GND
Line/ Line 1/ Line 2 Stereo inputs (Cinch female)
Pin Function Type
Tip Audio + In
Shield Ground A-GND
Mic balanced inputs (XLR 3-pins female)
Pin Function Type
1 Ground A-GND
2 Audio + In
3 Audio - In
Control (Cinch female)
Pin Function Type
Tip Volume control for zone 1 and 2 In
Shield Ground A-GND