Technical data
IPT2008-SDL Settings
Configurations
Strata CIX and CTX Telephones Administrator 12/04 25
Network Settings
³ To access the Network Setting screens
³ Select the CONFIG tab, then Network soft key.
Note There are two screens for Network Settings (shown below). Use the “J” and
“
I” soft keys to move from one screen to another and to go back to the
Configurations main screen.
The general operation on the Network Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the SET soft key to rewrite the NV-RAM data if any setting of a minor item
is changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the SET soft key to go to the Configurations Screen without rewriting the
NV-RAM data if no setting change of a minor item is made.
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the Configurations Screen without rewriting the NV-RAM data.
0GVYQTM5GVVKPI
&*%210
+2#FFT
5WDPGV
&HNV)9
5VCVKQP
=5'6?=%#0%'.?
Screen 1
0GVYQTM5GVVKPI
0QFG
+27/QFG$TQCFECUV
+27#FT
=5'6?=%#0%'.?
Screen 2