Technical data

Strata CIX and CTX Telephones Administrator 12/04 7
DKT/IPT Settings 2
This chapter explains how to enter data for your IP and DKT telephones (IPT2010-SD
and IPT2020-SD only).
Important!
• This chapter does not apply to the Strata CTX28.
• The IPT2010-SD telephone should not be used to program the telephone system.
• Make sure you have the following information before doing any of the steps found
in this chapter:
IP address, subnet mask number, router address, Station ID, CTX Strata Net node
number, IP address for the BIPU-M2A, etc.
Notes
You may want to enter a period or backspace when performing the following steps.
While in telephone programming mode (Press
++++ROG (simultaneously) to
enter programming mode), you can use these buttons for the following functions:
•Press

to enter a period.
•Press
9RO W to backspace.Press 6SNU to cancel entry and start over.