Specifications

Strata eManager ®
eManager Profile
2-50 Strata CIX Programming Vol.1 05/08
Step 3: Classes Setup
Assigns equipment, menus, parameters, and functions to each Login Account User.
1. Logon to eManager.
2. Click on eManager Profile > Classes
Setup from the menu.The Classes
Setup screen displays (shown right)
3. To edit a User Name, select a User
Name from the drop-down menu and
click Edit. The Login Accounts screen
displays.
4. In the Equipment section, you can
assign or not assign specific equipment
by highlighting the item and clicking the
arrow buttons on the screen.
The designated equipment moves from
one box to the other based on the arrow
you selected.
5. If you want to edit the equipment, click
Edit in the Equipment box and the
Equipment Editor screen displays.
6. In the Menu, Parameters and Functions
fields you can assign one of the default
levels to the User Name or click More and modify the list(s) for the individual user.
Menus: Options that have an arrow (X) next to them can be expanded further. If you un-check an
option it will be grayed out for this user in eManager menu.
Parameters: A list is displayed showing the CIX commands/parameters that are available along
with the permission given (H – hide, R – read, W – write). For example, if you change an option
from W to R the user can only read but not write to that parameter.
Functions: A list is displayed showing the functions available. Un-check a function when you do
not want it available to the user.
After making the changes to the list, click Save As and type a name for the new list in the pop-up box.
Click Back.
7. When you are finished making the changes to the screen and want to apply these specifications to all
equipment, check the field “Apply to All Equipment” and click Set
...or un-check the “Apply to All Equipment” field and highlight the equipment in the Assigned box that
applies to the revised defaults. Click Set.
In this manner, you can set different defaults for different pieces of equipment.