Specifications
Operation
System Setup
10-10 Strata CIX Programming 05/08
Programming Data File Name
You can now name the programming data file (default = default.dat) whatever you want based on the
following rules:
• MS-DOS® file
• Maximum character length = 8 (does not include the extension)
• Minimum character length = 1
• Extension must be “dat”. (example: tais-a02.dat)
• The following characters cannot be used: “& * + /:; < = >? [\] ^ ‘|.
Remote Update for Release 1 ~ 3
Step 1: Download and Extract CIX Software
The latest released version of CIX system software Update files are posted on the Toshiba FYI site
http://fyi.tsd.toshiba.com. To download the software files, follow the procedure below.
Step 1A: To download CIX System Software Files from FYI
1. From the Toshiba FYI website, click on Technical Services > Software (Strata Systems). The files are
located under the heading “CIX System Software.”
2. Double-click the appropriate link (Remote Update).
3. When the Toshiba Software License Agreement screen displays, click the Agree button. The File
Download dialog box displays.
4. Select the “Save this program to disk” radio button, then click OK. The Save As screen displays.
5. Save the file to an appropriately named folder that identifies the system type and software version, then
click Save.
Step 1B: Extract Downloaded Files
1. After the file download is complete, select the Open or Open Folder button on the Download Complete
screen to extract/open the files now, or select the Close button to extract the files later.
Notes
• The WinZip Self-Extractor screen displays if you selected the Open or Open Folder button.
• If you selected Close, double-clicking the .exe file later will bring up the WinZip Self-Extractor
screen.
The Remote Update self extracting .exe files:
2. In the “Unzip to folder:” field, make sure the path leads to the correct folder as shown below. If the path
is incorrect, click the Browse button to navigate to the appropriate path, then click the Unzip button.
3. Verify the unzip folder path for Remote Update: C:\Ctx\WinAdmin\Ctmc\Ctmc_local\Upload.
4. Verify the unzipped files or folders for Remote Update: “(Correct System)_R_MXnnn”.
Note The files can also be extracted to a temporary folder and the copied to the appropriate SM/SD
PROGRAM folder or Strata eManager Upload folder. The extracted (decompressed) files will be
approximately 15MB.