Specifications

Strata CIX Programming Guidelines
Use Default Auto-programming to Start Up
1-10 Strata CIX Programming Vol.1 05/08
Default Feature Access Codes
Refer to ”102 Flexible Access Codes’ on page 4-3.
Note For DKTs, assign only the PDN numbers. Do not program any other Flexible Buttons or features in
the phones. Strata CIX automatically recognizes and sets up digital telephone stations.
Table 1-17 Program 204 Default Data
In Program 204, all telephones are programmed as 20 buttons.
Table 1-18 Program 102 New Default Data
Feature Code Default Value Function
870 #963 Call Monitor Log Off
Table 1-19 Program 205/213/215 New Default Data
Feature Code Function
870 Call Monitor Feature Button
Table 1-20 Program 313 Default Data
Caller ID Prog 313 Function
FB1 Caller ID Receive Method nothing/ANI-MCI/ANI-Sprint/CLASS
FB2 Caller ID Identification Notice
Contents
ANI and DNIS/
DNIS/DID
Underlined entry is CIX00 and CIX200 default
Table 1-21 Program 100 Default Data
Virtual Slot
Equip.
Nos. *
Circuits
PCB
Code
Station Line
Numbers
Connection
0101 8 - Digital Telephones (no spkr OCA) 017 200~207 GMAU1A
(motherboard)
0102 3 - CO lines, with CLID 028 CO1~CO3
0103 Not used
0104 Standard Telephone 01~02 026 01~208
02~217
01-GMAU1A
02-GSTU1A
0105 4 - Voice Mail ports 026 220~223 GVMU1A
0106 Not used
0107 8 - Digital Telephones 017 209~216 GCDU1A
0108 3 - CO Lines with CLID 028 CO4~CO6
0205 Virtual BIOU 020 Relay Contact
Page, MOH
GCTU1A
*Slot codes are set during system initialization and cannot be changed.