Specifications

Trunks

Trunk DID/DNIS Setup Wizard

6-40 Strata CIX Programming 05/08

Trunk DID/DNIS Setup Wizard

This wizard enables you to assign Direct Inward Dialing / Dialed Number Identification Service (DID/DNIS)

to ILGs quickly and easily. The wizard automatically takes you through the different programs and

parameters required.

Follow the steps below to start using the DID/DNIS Wizard.

Step 1: Select or Create DID/DNIS ILG

1. Select Trunk > Setup Wizard > DID/DNIS.

2. After reading the instructions on the screen, click Start.

Step 1: 304 Select or Create DID/DNIS ILG screen displays.

3. In the 00 DID/DNIS Incoming Line Group (ILG) field, click Create

… or from the drop-down menu, select a DID/DNIS ILG to edit.

Note Only DID/DNIS ILGs appear in the drop-down box.

See table below for screen fields and field descriptions.

4. If you clicked Create in Step 3, the Create New

DID/DNIS ILG screen displays.

Fill in the three fields on the screen and click Create Now. The DID/DNIS Number Range Wizard

screen displays with the new information.

5. (Optional) Click DID/DNIS Table View to view existing DID/DNIS assignments. This table displays

assignments for all DID/DNIS ILGs currently programmed in the CIX. For more details, see “DID/DNIS

Table View” on page 6-24.

6. After creating or selecting a DID/DNIS ILG, click Next.

IELD DESCRIPTION

01 ILG Type Select analog for RDDU or RDTU interface, or ISDN for RPTU interface.

11 DID/DNIS Digit Length Select the number of digits (1~7) that compose each DID number for this DID/

DNIS ILG. This is the number of DID digits sent from the CO on incoming DID/

DNIS. If ANI digits are sent with DID digits, only set this parameter for the quantity

of DID digits sent.

02 Line Type DID lines should always be set as CO type lines.

03 DID/DIT Service DID lines should always be set as DID service.

04 Std/Strata Net Service DID lines should always be set for “Standard” service.