Specifications

Trunks
Strata CIX Programming 05/08 6-3
Trunks
11 DID Digits Select number of DID digits received from CO.
Possible values:0~7 (default = 0)
12 Speech/3.1 KHz Select Bearer Capability 3.1 KHz Audio or Speech.
Possible values:Audio (default) or Speech
13 Ringing Timer Delay 1 Select time to ring the Delay 1 destination.
Possible values:1~60 sec. (default = 12)
14 Ringing Timer Delay 2 Select time to ring the Delay 2 destination.
Possible values:1~60 sec. (default = 24)
15 Interdigit 1 Timer Select Interdigit 1 timer value.
Possible values:1~180 sec. (default = 15)
16 Interdigit 2 Timer Select Interdigit 2 timer value.
Possible values:1~180 sec. (default = 5)
17 Auto Camp-on Enable Automatic Camp-on.
Possible values:Enable (default) or Disable.
18 Calling Number ID Select whether the Calling Number Identification is provided by the User side or
Network side.
Possible values:User Provided (default) or Network Provided
19 Intercept Enable Intercept. A call is transferred to a special destination called intercept
position when the destination of a trunk line call is not determined with DID, DIT
or DISA. Intercept is also activated when the destination is determined, but the
call cannot be terminated due to a defect or an incorrect number. If the system
has a simplified attendant console, the Attendant Console is usually specified
to terminate the call. This function ensures termination of a trunk line call.
Possible values:Enable or Disable (default)
20 Send Dial Tone Whether or not to send dial tone to the originating system (for Tie trunks).
Possible values:Enable or Disable (default)
21 TGAC Override Enable Trunk Group Access Code (TGAC) override.
Possible values:Enable or Disable (default)
22 Network COS Enter the COS to be used in Traveling Classmark for StrataNet.
Possible values:1~32 (default = 1)
23 LCR Group Enter the LCR Group number. Calls from this ILG cannot tandem if this field is
not entered.
Possible values:1~16 (default = 1)
24 Change COS Override
Code
Enable authority to change COS Override Code.
Possible values:Enable or Disable (default)
F
IELD DESCRIPTION