Specifications

Station
Assignment
5-26 Strata CIX Programming 05/08
Cross Copy
Use the following steps to cross copy keys from one station to the keys of another station’s keypad:
1. From the Key Page, enter the Prime DN.
2. Click Submit.
3. Click the Cross Copy button. The Source and Target
Copy screen displays (shown right). Enter the “Copy
To” PDNs
… or click Select to select the target PDN.
4. From the Source DKT, select key to be copied.
5. Click the Copy Now button. The Detail report screen
displays.
6. Click Done. Target DKT with the copied key displays.
7. Verify the key copied.
Setting the One Touch Button
Follow the step above 1~8 above to assign an FB as a One Touch button. Then complete the following
steps:
1. Double-click the key assigned as One Touch.
2. The following dialog box displays
This dialog box is used to define each button with the One Touch Data.
3. Enter the One Touch data, then click OK.
Example 1: Setting up a One Touch button to transfer to Voice Mail.
Select the Cnf/Trn from the white box on the right, CNF displays in the One Touch Data field. Then
type #407 after CNF displays in the One Touch Data box. It adds Cnf/Trn #407 in the One Touch Data.
Click OK. Then click Submit.
Example 2: To originate a call from the PDN, select the FK as 01 if the PDN is on the first key then add
the telephone number next to FK01 in the One Touch Data box.
Cancel clears the changes and takes you back to the previous page.