Specifications
Station
Assignment
Strata CIX Programming 05/08 5-15
Station
03 Key Strip Type Select the number of feature buttons to assign to this station.
Note Although the scroll down menu enables you to choose any value
from 1~24, valid values are 10, 14 and 20.
Possible values:1, 3, 7, 8, 10, 14 or 20 (default)
Applies 1, 3, 10, 14, or 20 button keystrip type to digital telephones:
1 and 3 button keystrips apply to DKT2001, DKT3001/3201|, and DP5008
7 button keystrips apply to DKT3007/32307 and SoftIPT
8 button keystrips apply to IPT2008-SDL
10 button keystrips apply to DKT2010, DKT3001/3201, DP5018, DP5022,
DP5122, and DP5130
Note To set as or change from DP5130 Refer to Keystrip Type -
parameter 39.
14 button keystrips apply to the Large LCD DKT3014/3210
20 button keystrips apply to DKT2020, DKT3020./3220, DP5032, and
DP5132
04 Add on Modules Select the number of Add On Modules (ADM) assigned to this station. This
field is required if you want to program ADM FBs in Program 213. See
”Key’ on page 5-23.
Possible values:None (default), 1 unit, or 2 units
05 Tone First /Voice
First
Set PDN to have Tone First or Voice First signaling when called.
For each iES32 PDN, set to “Tone First”; if set to Voice First iES32 will not
answer.
Possible values:Tone or Voice (default)
06 OCA Type Select the OCA type. This field must be programmed with Auto OCA
Originate below.
Possible values:Handset (default) or Speaker
09 Handsfree MIC
Setting
If you call a station configured for Voice First signaling you can use this
parameter to enable the called parties microphone from your DKT.
Possible values:Enable or Disable (default = Enable)
10 Handsfree Tone If you call a DKT configured for Voice First signaling you can use this
parameter to send a splash tone to the called party.
Possible values:Enable or Disable (default = Enable)
11 Ext. Ring Repeat Enable repetitive ringing for incoming CO / PBX / Centrex signals.
Disabling this parameter defaults to standard CO ringing pattern (1 sec on /
3 sec Off).
Possible values:Enable or Disable (default = Disable)
F
IELD DESCRIPTION