Specifications

Station

Assignment

Strata CIX Programming 05/08 5-7

Station

47 Personal Admin Password Enter the Personal Admin password for this station.

Possible values:0 ~ 16 characters (default = no data)

48 Personal Admin Level Enter the Personal Admin user privilege level for this station.

Possible values:Normal, Super1 or Super2 (default = Normal)

49 SLT MW/CLID Option Enter the Message Waiting control type and Caller ID (CLID) for this

standard telephone.

Two types of message waiting signaling are available on the BSTCIU: (1)

FSK Visual Message Waiting Indication (VMWI) for standard telephones

with CLID and Relay Control for a 90v message waiting lamp.

1. Relay control only - same as BSTU interface relay control of MW lamp

voltage with no CLID signaling. Some phones do not support message

waiting lamps. Refer the Prog. 208-08 (Station Timer assignments) to

disable or delay sending MW lamp signal.

2. Type 1 - No call waiting tone, with FSK VMWI.

3. Type 1 and Type 2 - with call waiting tone, with FSK VMWI

When using a BSTCIU to send CLID to a standard telephone option 2 or 3

must be selected to enable FSK signaling.

Possible values:1, 2, 3

Default: 1 - Relay control

50 Off-Hook Preference for SLT Enter Off-Hook Preference for this station.

Possible values:None (Internal Dial Tone) (default)

CO Line Access - Enter the line/trunk number

OLG - Enter the OLG number

LCR - Station will access LCR

For OLG or LCR - The station can dial the Override SLT CO Line

Preference code.

Table 5-1 Station Assignment Data for DKT, SLT and IPT1020SD Telephones (Continued)

IELD DESCRIPTION