Operation Manual

5. Press ‘X’ on your controller to start scanning. Your PS3 should find a device called ‘BTH 068’. Click ‘X’
again to select this device.
6. When prompted for a Pass Key, enter “0000” and choose ‘OK’.
7. Registration is now complete.
Selecting the Headset as an Audio Device
1. On your PS3’s browser menu go to ‘Settings’ then ‘Accessory Settings’.
2. Under ‘Input Device’ select the device ‘BTH 068’ as Input and Output Device and choose OK. You
should see the microphone level displayed on screen confirming the headset is working correctly.
3. You are now ready to start your game or chat session.
Wearing the Headset
The headset can be worn on either ear. Rotate the
headset arm over the top of the headset to change ear
as shown.
Adjust the head band by sliding it out to achieve a
comfortable fit.
Position the mouthpiece so that it is close to your
mouth without being directly in front of it. This will
allow the mic to pick up your voice clearly without
picking up your breathing.
Using the Headset with your Games
Read the manual that came with your game for information on how to use the chat feature in your chosen
software. Where applicable, ensure that you select ‘BTH 068’ as your chosen input device from within the
game. If you want to hear through the headset’s speaker, choose the ‘BTH 068’ as your output device too.
Technical Support / Customer Services
Before contacting Datel’s customer service department, please ensure that you have read through and
understood the information in this manual.
Please ensure that you have information on when and where you purchased this product to hand.
DATEL CUSTOMER SERVICES EUROPE: