Instruction manual

System Features
Alternate Answer Point
66 Strata DK General Description 6/00
Alternate Answer Point
Users can answer a transferred outside line call from any station that has the /LQH button or a
Secondary [DN] for the destination station.
Amplified Conference Interface (DK40i, DK424i only)
Provides interface for a customer-supplied amplifier to improve low volume levels due to losses
on some CO lines. The amplifier is not dedicated to certain CO lines (it is shared by all CO lines)
and automatically connects to calls that include two CO lines: for example, DISA, conferencing
and external call forward.
This amplifier provides a louder sound level on these types of calls and requires two circuits on a
PEKU or PESU PCB installed in the Strata DK per amplifier. A maximum of two (DK40i) or four
(DK424i) amplifiers per system can automatically connect to any two CO line conference. This
feature is available for the Strata DK40i and DK424i.
Auto Attendant (Built-in)
The built-in AA feature acts as an operator that automatically directs incoming calls to stations.
Strata DK provides a built-in AA feature via optional feature upgrade keys: QKYS (DK14),
KKYS1~3 (DK40i), RKYS1~3 (DK424i).
Callers who dial in to assigned Strata DK AA lines can receive a dialing prompt menu, such as,
“Dial 5 for Sales, dial 6 for Tech Support.” When the caller dials the digit, the call routes to a
[DN], ACD group, or Distributed Hunt group (assigned in system programming).
AA can be programmed to answer CO line calls immediately or with a delayed ring option. AA
can pick up unanswered calls that ring for either 12 or 24 seconds at selected stations. An
unlimited number of CO lines can be assigned for built-in AA. Built-in AA applies to loop and
ground start CO lines only; it does not answer Tie or DID line calls.
Built-in AA enables access to outgoing lines via DISA, which should be security protected with
account codes and/or a DISA security code.
The AA feature requires customer-provided digital announcement device(s) and optional QRCU3
(DK14), K5RCU (DK40i) or BRCS (DK424i) tone receiver PCBs. Callers can be connected to
one digital announcer simultaneously. One DTMF receiver is needed per caller.
♦ DK14 enables up to three caller connections
♦ DK40i enables up to five caller connections
♦ DK424i each enable up to 24 caller connections
Auto Attendant is licensed by Dytel, Inc. under United States Patent No. 4,975,941.